TTI TCB-R2000 - Manual (Page 12)

TCB-R2000 English 1
Transceiver System Controls and Functions Transceiver System Controls and Functions
PROGRAMMING JACK
This is only for dealers’ use. Do not try to use this by connect-
ing any jacks or cables.
This may cause any troubles with your transceiver and void
your warranty.
11) Programming Jack
1
2
3
PTT & Call(Page) Button
Menu & AMG Button
Channel Down Button
Channel Up Button 4
Speaker Mute & Lock Button 6
Backlighting Color Selection 5
REMOTE CONTROL UNIT
While pressing this button, you can transmit.
Double-click this button to call(page) others.
1) PTT & CALL(PAGE) Button
PTT BUTTON
Menu Button : Press this button momentarily to enter the
Menu mode. Each press of this button steps the transceiver
sequentically through the different functions. (Same as the
Menu knob of the Remote LCD unit)
Use the channel up/down button to change the setting.
Press the PTT or Menu button or wait for about 10 seconds
to store your selection.
AMG Button : Press and hold this button to enter AMG
(Automatic Microphone Gain Control) selection. To deacti-
vate this selection press and hold this button again.
2) Menu&AMG Button
MENU & AMG BUTTON
Momentarily press this button to move down the channel.
The channel changes one by one.
Press and hold this button to quickly scroll down the channel.
3) Channel Down Button
CHANNEL DOWN
TCBR2000 man_reized.indd 12 2011.3.14 5:34:22 PM