Lcd display menu mode – TTI TCB-R2000 User Manual

Page 15

TCB-R2000

English 15

LCD DISPLAY

MENU MODE

Speaker Mute

Dynamic Squelch System

- Professional Menu Mode

Pressing and holding the up button of the Remote LCD unit, turn on the transceiver.

The LCD tells that you have entered the professional menu mode.

The first ones are the same normal menu mode items and the professional menu

mode items follow.

SQT-TONE
STATE : (ON,OFF)

ROGER
STATE : (ON,OFF)

BACK LIGHT DIMMER
(High,Low,Off)

QUICK
CH-STEP ; (,5,10,15)

EXT SPEAKER
STATE : (AUTO,OFF)

ID EDIT
(XXX XXX)

SCAN RECEIVER
TIME:(01-99,CONT.)

SCAN DELAY
TIME : (01-99.OFF)

CALL
SELECT: (OFF,1-5)

BEEP
STATE : (ON,OFF)

Reduction of noisy squelch

tail.

Both of the transmitting ra-

dio and the receiving radio

should be in the same selec-

tion to properly work.

Roger beep tone on or off

Back light dimmer selec-

tion

Step selection for quick

channel up/down

Controlling the external

speaker upon its connection

ID writing: Use the volume

knob to select the alphabet

or number and use the chan-

nel up/down button to move

to the next letter.

Timer selection during scan-

ning and upon effective

signal.

Timer selection after effec-

tive signal has disappeared.

Call(page) selection.

The call tone can be heard

from the receiving radios

only.

Key beep tone on or off

ON,OFF

,5,10,15 Channels

AUTO,OFF

Max.1 characters to

be written.

01-99 sec, CONT

(Continuously staying

while there is signal)

01-99 sec, OFF

(Immediate Scanning

Resumed)

01-05, OFF

ON,OFF

LOW,HIGH.OFF

Display

Functions

Settings

TCBR2000 man_reized.indd 15

2011.3.14 5:34:23 PM