TTI TCB-R2000 - Manual (Page 13)

TCB-R2000 English 1
Transceiver System Controls and Functions Transceiver System Controls and Functions
11) Programming Jack
Momentarily press this button to move up the channel.
The channel changes one by one.
Press and hold this button to quickly scroll up the channel.
4) Channel Up Button CHANNEL UP BUTTON
There are three colors available : Blue, Green and Red.
Momentarily press this button to change the color.
5) Backlighting Color Button BACKLIGHTING COLOR
Speaker Mute : Momentarily press this button to make
mute the speaker of the transceiver.
Lock : Press and hold this button to lock the major but-
tons.
The PTT, volume and squelch buttons are free from the lock
function activation.
6) Speaker Mute & Lock Button
SPEAKER MUTE & LOCK
Up Button : Use this button to change the
channels upward.
Down Button : Use this button to change the
channels downward.
Mute and Lock Button : Press and hold the
button. This locks the up button and down
button of the microphone. Also, this lock
works same as the lock button on the trans-
ceiver front panel.
Momentarily press the button to make mute
the speaker of the transceiver.
PTT&CALL(PAGE) Button : While pressing this
button, you can transmit.
Double-click this button to call(page) others.
6 Pin Microphone Connector :
Connect this to the microphone jack on the
front panel of the transceiver.
1
4
5
MICROPHONE
This is used for handsfree(VOX) microphone. The
transceiver should be in the VOX activated mode
to use this handsfree microphone.
HANDSFREE MICROPHONE
TCBR2000 man_reized.indd 13 2011.3.14 5:34:22 PM