Kleenmaid LEK37A Version 506066R4 - Manual (Page 3)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 506066 1
IMPORTANT: The electrical installation in the site shall comply with the Australian Electrical Standards,
AS3000, SAA wiring rules, and such local regulations that might apply. The gas dryer installation must
conform with the local regulations and AS5601 / AG601 “Gas Installations.”
Read complete Installation and Operation Instructions before using dryer.
The maximum drying load (dry weight) shall not exceed 9.0 kg (20 pounds).
IMPORTANT: Purchaser must consult the local gas supplier for suggested instructions to be followed if the
dryer user smells gas. The gas utility instructions plus the SAFETY and WARNING note directly above
must be posted in a prominent location near the dryer for customer use.
• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
• WHAT TO DO IF YOU SMELL GAS:
– Do not try to light any appliance.
– Do not touch any electrical switch; do not use any phone in your building.
– Clear the room, building or area of all occupants.
– Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s
instructions.
– If you cannot reach your gas supplier, call the fire department.
• Installation and service must be performed by a qualified installer, service agency or the
gas supplier.
W052
FOR YOUR SAFETY, the information in this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage, personal injury or death.
W033
WARNING
FOR YOUR SAFETY
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or
any other appliance.
W053