Directed Electronics Nissan User Manual

Page 36

1. F

ussee.. Remove and re-insert fuse into main fuse holder.

2. K

Keeyy.. Turn the ignition to the ON position.

The parking lights will immediately turn on to

indicate transmitter learn mode. After 5-

seconds the parking lights will turn off and then

turn back on to indicate ready to learn mode.

3. P

Prrooggrraam

m.. Within 10-seconds, press and hold the

button on the transmitter, until the parking lights turn off

and then back on. Now release the

button. Repeat

this step within 10-seconds of programming a transmitter to

program additional transmitters to your system.

4. E

Exxiitt L

Leeaarrn

n M

Mood

dee.. After programming the transmitter, wait

10-seconds, the parking lights will turn off. Programming

transmitter(s) is now complete.

note: To ensure proper system operation, use the trans-
mitter at a distance of greater than 18 inches from the
control module.

PROG

ARM

DISARM

PROG

ARM

DISARM

note: If the WHITE (H1/9) wire at the control module
is not cut the doors will lock 3-seconds after turning the
ignition on.

G21994_04-06.qxd 12/11/06 3:36 PM Page 32