Kleenmaid ICK98X - Manual (Page 26)

26
Automatic time limiter
If a hotplate is in constant use for a long time without
the setting being changed, the automatic time limiter
will be activated.
The hotplate heating is interrupted.
An F and an 8 flash alternately in
the hotplate indicator.
The indicator goes out when you touch any
control panel. Now you can reset the hotplate.
The time at which the time restriction is activated
depends on the heat setting (1 to 10 hours).
Switching off input confirmation
A short buzz confirms that a button has been
touched. This buzzer can be turned off:
Switch on the hob using the main switch.
1.
Set all hotplates to heat setting 3.
2. Switch off all the hotplates one by one from right
to left.
3. Touch the main switch for at least 5 seconds, after
which a confirmation signal sounds.
You may also switch the input confirmation on again.
Proceed in the same manner as for switching off.