Kleenmaid ICK98X - Manual (Page 24)

24
1. The hob must be switched on.
Touch the
Á symbol for at least 2 seconds.
Two signals sound.
The Ă
¢ indicator flashes after 2 seconds.
2. Select the hotplate using the + or - symbol and set
the heat setting. The Ă
¢ indicator in the hotplate
display flashes. Recording begins.
3. Now prepare the dish as you wish. The settings
are recorded.
4.
When your meal is ready, switch off the hotplate.
The cooking event is stored.
If you set more than 5 heat settings for your dish,
≡≡
Ăflashes in the timer indicator and
≡
flashes in
the hotplate indicator. The following heat settings are
no longer displayed. The timer indicator goes out
when you touch any timer function control panel.
You can finish cooking the dish as you wish.
If you record more than 99 minutes, 99 flashes in
the timer indicator and
≡
flashes in the hotplate
indicator. The following heat settings are no longer
displayed. The displays go out when you touch any
control panel. You can finish cooking the dish
as you wish.
If you want to store a different memory event for
a hotplate:
make a new recording. The old memory
is overwritten.
Automatic time limit can also be activated using the
memory function.
If you want to cook a dish again for which the setting
has been recorded, call up the memory.
1.
Touch the Á symbol briefly. A signal sounds.
2.
Select the required hotplate using
the + or -Ăsymbol. The memory program starts.
Method
Notes
Calling up the
memory