Kleenmaid CH24 - Manual (Page 10)

• 10 •
CLEANING AND MAINTENANCE
GENERAL ADVICE
✓ It is advisable to clean when the appliance is cold and
especially when cleaning the enamelled parts.
✓ Avoid leaving alkaline or acidic substances (lemon juice,
vinegar, etc.) on the surfaces.
✓ Avoid using cleaning products with a chlorine or acidic
base.
ENAMELLED PARTS
✓ All of the enamelled parts must be washed only with a
sponge and soapy water or with non-abrasive products.
Dry, preferably, with a soft cloth or chamois.
STAINLESS STEEL
✓ Clean with a suitable product. Always dry fully with a
soft cloth or chamois.
BURNERS AND RACKS
✓ These parts may be removed and washed with suitable
products.
✓ The burners and their caps must be well dried after
cleaning and put back perfectly into their slots. It is
very important to verify the positioning of the burner-
caps because a misplacing in their slots can cause
serious damage.
✓ In the appliances with electrical ignition for the
burners, verify that the electrode is always cleaned well
to permit a regular spark.
SERVICE AND MAINTENANCE
If the ignition spark fails to operate or does not light the
gas check the following items before calling the authorized
service agent:
✓ Burner is reassembled and located correctly.
✓ Spark electrode and white ceramic are clean and dry.
✓ 240 VAC power supply is connected.
Contact the local gas utility or the authorized service
agent if:
✓ You can smell gas when all burners are turned on.
✓ The burners do not remain alight at the minimum
marked setting
✓ The burner flame is yellow or emits an unusual odour
Note that a bi-annual inspection of the appliance by an
authorized service agent or your local gas utility will
ensure many years of trouble free operation of your
appliance.