Kemppi MSF 53 User Manual
Page 8

EN
Functions of SF 52 and SF 53 function panel
1.
2.
11.
9.
3.
10.
4.
6.
5.
7.
13.
12.
8.
14.
15
16.
17.
1.
Main switch
2.
a) Wire feed speed/welding current/sheet strength display
b) Display of selected adjustable parameter
3.
Activation of welding dynamics adjustment
4.
Selection of gas/water cooled MIG gun
5.
Gas purge
6.
Weld data: Last used welding parameters shown in displays
7.
Wire inch
8.
a) Welding voltage display
b) Display of value of selected adjustable parameter
9.
1-MIG selection check/1-MIG welding arc selection activation
10. a) Selection of MIG process: 2T/4T
b) Changing of basic parameters of the unit, SETUP (long pressing)
11. Selection of welding process MIG,1-MIG, MMA, FR-MIG *)
12. Activation of additional MIG function parameter adjustment
13. Selection of additional MIG functions
14. a) Adjustment of wire feed speed
b) Adjustment of welding power setting (1-MIG)
c) Adjustment of rod current
d) Selection of SETUP parameter
e) Selection of 1-MIG arc (material)
15. Memory channels, storage of MIG parameters
16. a) Welding voltage display
b) Adjustment of length of welding arc (1-MIG)
c) Adjustment of MIG dynamics
d) Adjustment of SETUP parameter
e) Selection of 1-MIG arc
17. Manual control/remote control unit selection
*) FR-MIG for root pass welding is not included in standard delivery
6
FastM
ig MSF 53, 55, 57 / © Kemppi O
y / 1515