Kemppi MSF 53 - Manual (Page 5)

EN
1. PREFACE
1.1 GENERAL
Congratulations on your choice of the FastMig™ MSF series power source. Reliable and durable,
Kemppi products are affordable to maintain, and they increase your work productivity.
This user manual contains important information on the use, maintenance, and safety of
your Kemppi product. The technical specifications of the device can be found at the end of
the manual. Please read the manual carefully before using the equipment for the first time.
For your safety and that of your working environment, pay particular attention to the safety
instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi Web site at www.kemppi.com.
The specifications presented in this manual are subject to change without prior notice.
Important notes
Items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with the ’NOTE!’ notation. Read these sections carefully and
follow their instructions.
1.2 PRODUCT INTRODUCTION
Kemppi FastMig™ MSF is wire feeder designed for demanding professional use.
From our product family you can choose equipment intended either for 200-mm or 300-mm
wire reel due to purpose of use. MSF 53 suits for 200-mm and MSF 55 and MSF 57 for 300-mm
wire reel.
For both wire feeder units there are two alternative panels; simple and advanced panels.
Alternative panels for MSF 53 are SF 51 and SF 52, panels for MSF 55 and MSF 57 are SF 53 and
SF 54.
Operations of wire feed unit are controlled and adjusted with microprocessor.
This manual provides instructions on the start-up of the MSF 53, MSF 55 and MSF 57 MIG units
and panels SF 51, SF 52, SF 53 and SF 54 as well as the functions of the wire feed unit.
3
FastM
ig MSF 53, 55, 57 / © Kemppi O
y / 1515