Kanguru KRMC Cloud - Manual (Page 48)

48
Appendix A : Description of Remote Actions
appendix a : description of Remote actions
delete all data – Deletes all data stored on the device’s secure partition and resets the device to the
factory default settings. The admin settings are unaffected by this action.
Change User Password – Change the device’s user password.
• New Password: Enter the new user password for the device.
• Confirm Password: Enter the new user password again to confirm the password. This password
must match the password entered in the New Password field.
• Master Password: Enter the devices Master Password.
Message – Send a notification message to be displayed on the device host’s computer.
Refresh device – Sends updates from the device to the server regarding any changes made to the
device’s information
Re-provision – Remotely update device security policies:
• Minimum Password Length (8-15): The minimum number of characters a password is
required to contain to be valid. The default value is “8”.
• Password expiration frequency (none, 30 days, 60 days, 90 days, 1 year): The number
of days before a password expires. Once expired, the user will be forced to change their user
password the next time they successfully login. The default value is “none”.
• allow offline Profile: When selected, the user will be able to access their device even if the
device cannot communicate with the server. When left unselected, the user will not be able to
access their device when it cannot communicate with the server. The default setting is selected.
• Minimum (Uppercase letters, Lowercase letters, symbols, Numbers) required in
password: The mandatory minimum number of upper and lower case letters, symbols and
digits a password requires to be valid.
• Number of old passwords not allowed in the future (0-10): Define the number of previously used
passwords that may not be accepted as your current password.
• Maximum number of password attempts (3-15): The number of attempts the user has to
enter the correct login password. The default value is “7”.
• after Password Retries expire: Select what the device should do if the number of allotted
password retries is exceeded. The default value is set to activate a timeout period.
○ format device: When selected, if the number of password attempts is exceeded then the
device automatically deletes all data and resets to the factory default settings.
○ activate timeout period: When selected, if the number of allowed password attempts is
exceeded the device automatically goes into timeout. The user will have to wait for the
timeout period to pass before they can enter a password again. This is the default setting.
○ disable device: When selected, if the number of allowed retries is exceeded the device is
automatically disabled. The device user will be unable to login to their device or access the
device’s secure partition again until it is enabled by the administrator using KLA. For more
information on enabling devices please refer to your KLA user manual.
• timeout Value (1, 2, 5, 10, 30 minutes): If activate timeout Period has been selected, the
user will have to wait this long before they can attempt to enter their password again when they
exceed the number of allowed password retries.
• Change Password at Next Login: When selected, the user will forced to change their user
password the next time they successfully login.