Kanguru KRMC Cloud - Manual (Page 28)

28
5.2.4.2 Create an action for multiple groups
If you want to create an action that will be executed on more than one group:
1. From the Device Groups page, select the device(s) you want to create the action for by clicking
the check box next to each groups. A check mark means the groups has been selected.
Note: If you want to select all of the groups listed on the page, click on the check box located
next to ‘Name’. If you want to select all of your groups, including groups that are listed on other
pages, click on the all elements check box located under the Operations section.
2. Select ‘Add Action’ from the drop down menu located in the Operations section and then click
on the oK button.
The Create Action window appears.
3. Create your action the same as you would for a single group, but keep in mind that this action
will be performed on all devices in all the selected groups.
Device Groups