Kanguru Exchange Pro - Manual (Page 10)

Kanguru Media X-Change Pro 1.8”
- 10 -
4. Transferring from a USB Device
You can connect USB devices to your Media X-Change Pro using the include
USB adapter. Please note that most, but not all digital cameras with a USB
connection are supported. Please follow the instructions below to transfer from a
USB flash device.
1. Plug the USB cable (short one) into the Media X-Change Pro.
2. Connect your USB peripheral to the Media X-Change as seen below.
3. Turn on your USB peripherals.
4. For some digital cameras, you need to change the setting of the “USB
connection” to the “PTP” mode.
5. Turn on the Media X-Change Pro.
6. Press the COPY button to begin the transfer.
Single File Copy
1. Plug the USB cable (short one) into the Media X-Change Pro.
2. Connect your USB peripheral to the Media X-Change as seen below.
4. For some digital cameras, you need to change the setting of the “USB
connection” to the “PTP” mode.
5. Connect two USB cables.
6. Turn on the Media X-Change Pro.
7. Press the ESC button to select the UD device and press the OK button.
8. Scroll to FILE function and press the OK button.
9. Use the up or down button to select a folder or a file you want to copy.
10. Press COPY button to open file manager.
11. Scroll to and press the OK button, copy function will be performed.