Kanguru DualTrust - Manual (Page 6)

6
2. Kanguru Defender Manager DualTrust
Kanguru Defender Manager DualTrust (referred to throughout this manual as KDMDT) is the client
software preloaded on the Defender’s CD-ROM partition. The user needs to login to KDMDT in order to
access the secure online environment. KDMDT comes pre-installed on your Defender and no installation
on your PC is necessary.
Note: The Kanguru Defender DualTrust is a warm boot device. You need to have it connected to a
powered on PC running Windows in order to run.
2.1 running KDMDT
To run KDMDT, simply connect your Defender DualTrust to your computer through a USB port. When
you connect your Defender DualTrust, a CD-ROM partition and a removable disk partition should appear
under My Computer. If you are running Windows 7 and do not see the removable disk, please refer to
page 7 in this manual.
The KDMDT application should start automatically.
If KDMDT does not start automatically:
1. Open My computer and open the Defender DualTrust’s CD-ROM partition. The drive letter (e.g.
D:, E:, F:) will depend on your computer.
2. Double-click on the KDMDT.exe file to run the application.
caution! The KDMDT.exe file needs to remain on your Defender DualTrust’s CD-ROM partition at all
times. Always run the application from the CD-ROM partition. Do not try to copy or run KDMDT from
your computer’s local hard drive.
Kanguru Defender Manager DualTrust