Datalogic Scanning POWERSCAN 7000 User Manual
Page 85

Linear Symbologies
Product Reference Guide
6-17
Code 128 Message Length
Scan the bar codes below to change the message length. Refer to
Mes-
sage Length Description on page 6-2
for additional information. Mini-
mum and Maximum lengths = 0-80. Minimum Default = 0, Maximum
Default = 80.
Code 128 Code Page
Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be
because the bar code being scanned was created using a code page that is
different from the one the host program is expecting. If this is the case,
scan the bar code below, select the code page with which the bar codes
were created (see
Code Page Mapping of Printed Bar Codes on page A-7
)
and scan the value and the
Save
bar code from the
Programming Chart on
page B-5
of this manual. The data characters should then appear prop-
erly.
Telepen
Minimum Message Length
Maximum Message Length
Code 128 Code Page