Ocr modulo 10 check character, Ocr modulo 36 check character – Datalogic Scanning POWERSCAN 7000 User Manual
Page 141

OCR Check Character
Product Reference Guide
8-11
dddddddc
To create this template, you would enable the OCR-A font. Scan the
Modulo 10 Check Character
symbol. Then scan the
Enter OCR Template
symbol, and scan the
d
from the
OCR Programming Chart
seven times,
and scan the
c
once. Scan
Save OCR Template
(
page 8-17
). This tem-
plate will let you read any combination of six digits with a correct check
character after. (If the check character is invalid, the imager will issue an
error beep.) For example, the following string could be scanned:
01234569
and the output would be: 0123456
OCR Modulo 10 Check Character
Scan this symbol to program the OCR template for a simple modulo 10
checksum of the digits 0 through 9.
OCR Modulo 36 Check Character
Scan this symbol to program the OCR template for a simple modulo 36
checksum of the digits 0 through 9 and the letters A through Z.
OCR Modulo 10 Check Character
OCR Modulo 36 Check Character