Diamond Systems Rhodeus-LC LX800 PC/104 User Manual
Page 46
- 43 -
BIOS
3.10 Set Password
Using Password to set a password that will be used exclusively on the
system. To specify a password, highlight the type you want and press
The Enter Password: message prompts on the screen. Type the password,
XSWRHLJKWFKDUDFWHUVLQOHQJWKDQGSUHVV(QWHU!$QGWKHV\VWHPFRQ¿UPV
your password by asking you to type it again. After setting a password, the
screen automatically returns to the main screen.
To disable a password, just press the
WRHQWHUWKHSDVVZRUG$PHVVDJHZLOOFRQ¿UPWKHSDVVZRUGWREHGLVDEOHG
Once the password is disabled, the system will boot, then you can enter
BIOS Setup freely.