Diamond Systems Rhodeus-LC LX800 PC/104 - Manual (Page 32)

- 29 -
BIOS
Boot Up NumLock Status
It allows you to activate the NumLock function after you power up the
system.
Setting: On (Default), Off.
Security Option
It allows you to limit access to the System and Setup.
When you select System, the system prompts for the User Password every
time you boot up.
When you select Setup, the system always boots up and prompts for the
Supervisor Password only when the Setup utility is called up.
Setting: Setup (Default), System.
Cyrix 6x86/MII CPUID
Disable CPU ID instruction if you are using Netware v5.0.
Setting: Enabled (Default), Disabled.