Jetway Computer NC93 - Manual (Page 36)

31
Disabled; Enabled. When set as enabled, certain values can be set in the following sub items.
-CPU Thermal-Throttling Temp
The optional setting is from 40 to 90
°C
-CPU Thermal-Throttling Duty
User can set the Thermal-Throttling Duty by select a specific percentage.
-CPU Thermal-Throttling Beep
The optional settings are：Disabled; Enabled.
Smart FAN Configurations
User can select CPU smart FAN by pressing Enter to set relative configurations in the CPU
FAN Smart Mode:
-CPU FAN Smart FAN Mode
The optional settings are: Disabled; Enabled. When set as Enabled, users can select values for
smart fan function by entering the following sub items
-CPU Full-Speed Temp
Choose full-speed temperature in the range of 30~100
°C
-CPU Idle Temp
Choose full-speed temperature in the range of 30~100
°C
CPUFAN Idle-Speed Duty
-Select CPU FAN Idle-Speed Duty from 0% ~100 %
CPU Temperature/ System Temperature/CPU FAN Speed, SYS FAN1, SYSFAN2
Speed/VCC 3V/Vcore/ NB/+5V/+12V/5VSB(V)/VDIMM/VSB3V/Vbat
This will show the CPU/FAN/System voltage chart and FAN Speed.