Jetway Computer NC93 User Manual
Jetway Computer Motherboard
TECHNICAL
MANUAL
Of
INTEL 945GC
Based
Mini-ITX M/B For ATOM Processor
NO.G03-NC93-F
Rev.: 1.0
Release date: January, 2009
Trademark:
* Specifications and Information contained in this documentation are furnished for information use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manufacturer.
Table of contents
Document Outline
- TECHNICAL MANUAL
- Of
- INTEL 945GC
- Based
- NO.G03-NC93-F
- Rev.: 1.0
- Chapter 1
- 1-1 Features of motherboard
- 1-2 Specification
- 1-3 Layout Diagram
- 2-1 Jumper Setting
- 2-2 Connectors and Headers
- 2-2-1 Connectors
- 2-2-2 Headers
- 3-1 Entering Setup
- 3-2 Getting Help
- 3-3 The Main Menu
- 3-4 Standard CMOS Features
- 3-5 Advanced BIOS Features
- 3-6 Advanced Chipset Features
- If an insufficient number of cycles is allowed for the RAS to accumulate its charge before DRAM refresh, the refresh may be incomplete and the DRAM may fail to retain date. Fast gives faster performance; and Slow gives more stable performance. This field applies only when synchronous DRAM is installed in the system.
- 3-8 Power Management Setup
- 3-9 PnP/PCI Configuration
- 3-10 PC Health Status
- 3-11 Miscellaneous Control
- Host/PCI Clock at Next Boot
- DRAM Clock at Next Boot
- CPU Vcore 7-Shift
- VCC 1.05 Select
- VCCP Select
- NB Select
- VCC 2.5 V Select
- VDIMM Select
- 3-12 Password Setting
- 3-13 Load Standard/Optimized Defaults