Jetway Computer NC93 - Manual (Page 29)

24
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If your
IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of
the optimal number of block read/writes per sector the drive can support. The settings are: Enabled,
Disabled.
SATA Port Speed Settings
The optional settings are: Disabled, Force GEN1 and Force GEN2.
3-7-2 Onboard Device Function
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Device Function
Item Help
Onboard PCIE LAN Controller Enabled
Onboard PCIE LAN BootROM Disabled
High Definition Audio Enabled
USB Host Controller Enabled
USB 2.0 Function Enabled
USB Keyboard Legacy Support Disabled
USB Mouse Legacy Support Disabled
USB Storage Legacy Support Disabled
**USB Mass Storage Device Boot Setting**
Menu Level >>
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Onboard PCIE LAN Controller
Setting to [Enabled] allows the BIOS to auto-detect the LAN controller and enable it. Setting
options:[ Enabled] and [Disabled] .
High Definition Audio
The selection for you to choose the embedded Audio function or 3
rd
party audio interface
installed. The settings are: Enabled and Disabled.
USB 2.0 Function Keyboard/Mouse /Storage Latency Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB Mouse /keyboard. The settings are: Enabled, Disabled.