Ivoclar Vivadent IvoBase Injector v.2 - Manual (Page 26)

26
9. Product Specifications
9.1 Delivery form
– IvoBase Injector
– Power cord
– USB download cable
– 2 Sets of flasks
– Thermal glove
– Temperature Checking Set
– var. accessories
– Warranty Card, Operating Instructions, Service Passport
9.2 Technical data
Nominal voltage 100 – 120 V /200 – 240 V
Nominal frequency
50 Hz – 60 Hz
Acceptable voltage fluctuations +/– 10%
Nominal output 450 W
Protection category I
Overvoltage category II
Contamination level 2
Dimensions Depth: 400 mm
Width: 340 mm
Height: 560 mm
Max. temperature 300 °C (572 °F)
Weight 35.6 kg
Safety notes
The IvoBase Injector complies with the following guidelines:
– IEC 61010-1:2001
– EN 61010-1:2001
– UL 61010-1:2004
– CAN/CSA-C22.2 No. 61010 -1:2004
– IEC 61010-2-010:2003
– EN 61010-2-010:2003
– CAN/CSA-C22.2 No. 61010-2-010:2004
Radio protection / electromagnetic compatibility EMC tested
9.3 Acceptable operating conditions
Acceptable ambient temperature:
+5 °C to +40 °C / +41°F to +104 °F
Acceptable humidity range:
Relative humidity 80% for temperatures up to 31 °C / 87.8 °F
gradually decreasing to 50% relative humidity at 40 °C / 104 °F
condensation excluded.
Acceptable ambient pressure:
The injector is tested for use at altitudes of up to 2000 m (6562 ft)
above sea level.
9.4 Acceptable transportation and storage conditions
Acceptable temperature range: –20 °C to +65 °C / –4 °F to +149 °F
Acceptable humidity range:
Max. 80% relative humidity
Acceptable ambient pressure: 500 mbar to 1060 mbar
Use only the original packaging together with the corresponding
foam material for shipping purposes.