Ivoclar Vivadent Telio CS Desensitizer - Manual (Page 2)

Application procedure:
a) Short description of the application of
Telio CS Desensitizer
– Prior to temporization procedures, luting proce-
dures, direct restorative procedures (amalgam,
cement restorations):
– Dentin surfaces must be clean and dry. Keep working
field dry (e.g. cotton rolls).
– Apply Telio CS Desensitizer on dentin and gently
brush it into the dentin for 10 seconds using a suit-
able instrument (brush, applicator brush).
– Carefully disperse excess to a thin layer with blown
air / dry with an air syringe. Do not overdry the
dentin.
– Continue with the planned treatment measures (tem-
porary restorative procedures / luting, cementation,
direct restorative procedures).
– Sensitive tooth necks
– Dentin surfaces must be clean and dry. Keep working
field dry (e.g. cotton rolls).
– Apply Telio CS Desensitizer and gently brush it into
the dentin for 10 seconds using a suitable instrument
(brush, applicator brush).
– Wait 20 seconds (improves penetration of Telio CS
Desensitizer into the often sclerotic and less penetra-
ble root dentin of sensitive tooth necks).
– Carefully disperse excess to a thin layer with blown
air / dry with an air syringe. Do not overdry the
dentin.
– Repeat application if the complaints recur or persist.
b) Detailed instructions for the individual indications
1. Temporary restorations
– Telio CS Desensitizer makes the temporary restoration
phase more comfortable for patients, since it reduces
the sensitivity of prepared, and in some cases exposed,
dentin surfaces.
– Prepare cavity/abutment.
– You may take the impression at this stage or wait until
you have applied the desensitizer (see notes).
– Dentin surfaces must be clean and dry. Keep working
field dry (e.g. cotton rolls).
– Apply Telio CS Desensitizer and gently brush it into the
dentin for 10 seconds using a suitable instrument
(brush, applicator brush).
– Carefully disperse excess to a thin layer with blown air /
dry with an air syringe. Do not overdry the dentin.
– Fabricate the temporary restoration / provisionally
cement restoration
Notes:
– The application of Telio CS Desensitizer somewhat
increases the adhesion of the light-curing temporary
inlay and onlay materials from Ivoclar Vivadent to the
cavity walls. Nevertheless, they can be removed at the
second appointment without difficulty.
– If light-curing temporary C&B materials are used, Telio
CS Desensitizer should be applied after the fabrication
of the temporary. If you apply Telio CS Desensitizer prior
to fabricating the temporary, the material may stick to
the tooth structure when the impression is repositioned
into the oral cavity during the setting/light-curing pro-
cedure and may be difficult to remove.
– The application of Telio CS Desensitizer during tempo-
rary fabrication does not affect or limit the choice of the
cementation system or the success of the cementation
procedure in the second appointment. Both convention-
al and adhesive cementation systems can be used for
cementation purposes.
– The application of Telio CS Desensitizer to enamel does
not create any problems and does not affect the subse-
quent steps of the treatment or the materials being
used (thoroughly remove excess desensitizer / dry)
– Telio CS Desensitizer can be applied before or after
impression-taking. The layer thickness is very thin, so
that the accuracy of fit is maintained, even if the desen-
sitizer is applied after impression-taking. Interaction of
the desensitizer with impression materials are not
known (if applied before impression-taking).
2. Luting / Cementation
(Application in conjunction with conventional
cements such as phosphate cements or glass
ionomer cements)
– Remove temporary.