Ivoclar Vivadent Telio CS C - Manual

English
Instructions for Use
Description
Telio
® CS C&B is a self-curing composite material in paste form used for
the fabrication of temporary crowns, bridges, inlays, onlays, veneers and
post-retained temporary crowns. It is supplied in specially designed car-
tridges that provide a 10:1 base/catalyst ratio.
Shades
Telio CS C&B is available in five shades: Bleach BL3, A1, A2, A3, A3.5. Telio
CAD and Telio Lab are available in the same shades. They are coordinated
and compatible with each other.
Composition
Telio CS C&B is composed of polyfunctional methacrylates (48 wt %) and
inorganic fillers (47 wt %). Additional ingredients include additives, initiators,
stabilizers and pigments (5 wt %).
Indications
Telio CS C&B is a temporary crown and bridge material suitable for the
fabrication of crowns, bridges, inlays, onlays, veneers and post-retained
temporary crowns. Because it is compatible with all the other products of
the Telio range (both in terms of shade and chemistry), it is an ideal lining
material for temporary restorations made of Telio CAD and/or Telio Lab.
In addition, Telio CS C&B may be used for lining prefabricated polycarbonate
resin crowns.
Contraindication
Do not use if a patient is known to be allergic or intolerant to any of the
ingredients of Telio CS C&B.
Side effects
In rare cases, components of Telio CS C&B may lead to a sensitizing
reaction. In this case, the use of the product should be discontinued.
Application
1. Preliminary impression
Fabrication of an alginate or silicone matrix.
If the unprepared teeth exhibit a suitable occlusal morphology that may be
transferred to the provisional restoration or even the planned permanent
restoration, and if abutment teeth in suitable position are available, a pre-
liminary impression can be made to serve as a matrix for the fabrication of
the temporaries. Prior to the preparation or extraction of the teeth, an
impression of the pre-operative situation is made using addition-cured sili-
cone impression material (e.g. Virtual
® ; dimensionally stable impressions)
or alginate (e.g. Vival NF; impressions that are dimensionally stable for a
limited period of time). To facilitate repositioning of the impression in the
oral cavity, the interdental gingival areas should be trimmed and undercuts
removed in the impression, if necessary. If the occlusion is defective, the
Telio ® CS C&B
– Selvherdende provisorisk
K&B-materiale
– Zelfuithardend materiaal voor
provisorische kronen en bruggen
– Χηµικά πολυµεριζ µενο υλικ για
προσωρινές αποκαταστάσεις
στεφανών και γεφυρών
– Kendili¤inden sertleflen geçici kuron
ve köprü materyali
– Ò‡ÏÓÓÚ‚Âʉ‡˛˘ËÈÒfl χÚÂˇÎ
‰Îfl ËÁ„ÓÚÓ‚ÎÂÌËfl ‚ÂÏÂÌÌ˚ı ÍÓÓ-
ÌÓÍ Ë ÏÓÒÚӂˉÌ˚ı ÔÓÚÂÁÓ‚
– Kompozytowy chemoutwardzalny
materiał do wykonywania
tymczasowych koron i mostów
– Self-curing temporary c&b
material
– Selbsthärtendes temporäres
K&B Material
– Matériau autopolymérisant
pour la réalisation au cabinet de
couronnes, bridges et facettes
provisoires
– Composito autoindurente per
ponti e corone provvisori
– Material provisional C&B
autopolimerizable
– Material autopolimerizável para
coroas e pontes provisórias
– Kemisk hærdende provisorisk
krone- & bromateriale
– Kemialliskovetteinen
kruunu-ja siltamateriaali
Käyttöohjeet
Bruksanvisning
Productinformatie
Oδηγίες Xρήσεως
Kullan›m K›lavuzu
àÌÒÚÛ͈Ëfl
Instrukcja stosowania
Instructions for Use
Gebrauchsinformation
Mode d’emploi
Istruzioni d’uso
Instrucciones de uso
Instruções de Uso
Bruksanvisning
Brugsanvisning
62
85
48
/1
21
1/
W
E3
/H
For dental use only.
Caution: U.S. Federal law restricts this
device to sale by or on the order of a
licensed dentist.
Made in Liechtenstein
Ivoclar Vivadent AG,
FL-9494 Schaan/Liechtenstein