Ivoclar Vivadent Quick - Manual (Page 9)

9
3. Product Description
3.1 Components
The Quick comprises the following components:
– Base with electronic controls and sensor
– Swivel arm with lamp
The electronic controls and the sensor for light call-up are
located in the base of the unit. The lamp is located in the
swivelling upper part. The lamp is cooled with a ventilator.
3.2 Hazardous areas and safety equipment
Description of the hazardous areas:
Description of the safety equipment:
Hazardous area
Lamp
Swivel arm
Electrical components
Sensor
Type of risk
Risk of burning
Eye damage
Risk of crushing
Risk of electrical shock
Direct eye contact with the
sensor from a short distance
may damage the eyes
Safety equipment
Protective conductor
Anti-glare shield
Overheating protection
Electrical fuses
Protective effect
Protection from electrical shock
Prevents damage to the eyes
Prevents overheating of the
light source
Protect the unit from excess
voltage
Also refer to Chapter 2.
3.3 Functional description
The lamp with the respective filters radiates light of a 400-500 nm
wavelength, which initiates setting of the material. The light is
called-up or stopped by means of an infrared sensor. The unit is
equipped with an integrated timer that auto-matically switches
off the light after a certain period of time.
Quick-BA-5spr.qxd 9.8.2006 7:28 Uhr Seite 9