Ivoclar Vivadent Quick - Manual (Page 14)

14
7.3 Cleaning
The unit may only be cleaned when it is cool, since there
is a burn hazard. Do not use any cleaning solutions.
The following parts have to be cleaned from time to time:
7.4 Changing the fuse
Important
Use only fuses with test labels according to the
respective values specified in "Technical Data"
(Chapter 9.2).
Disconnect power cord (17). The fuse holder (22) is located in the
power socket of the unit (7). Push the lateral fuse stop (24) in the
direction of the arrow with a screwdriver. The fuse holder (22) is
thus released and may be removed from the unit. Check fuse (20).
Replace defective fuse and insert new one with its holder into the
power socket (7) until it snaps into place.
Do not remove the voltage selector (25) or even insert it
in another position. The selected voltage can be seen in
the viewing window of the voltage selector (26)
Item
Sensor surface
Lamp lens (outside)
Housing surfaces)
Frequence
weekly
every six months
weekly
Cleaning material
cloth
Q-tips or cloth
cloth
7
24
26
22
5
25
20
21
22
Quick-BA-5spr.qxd 9.8.2006 7:28 Uhr Seite 14