Ivoclar Vivadent Light Tray - Manual (Page 5)

Impression materials
All impression materials can be used with the
appropriate adhesive – provided that they do not
require moist storage.
Suitable polymerization units
• Ivoclar Targis Power – 10 min. Program 2
• Any other commercially available ultraviolet or
halogen light-polymerization unit.
Important
• Place excess material back into the light-
protective packaging immediately!
• Material demonstrating signs of polymerization
should be discarded!
• Remove the soft inhibited surface layer with
alcohol!
Storage
• Store protected from light at room temperature
not exceeding 25 °C (77 °F)
• Storage temperature: 5–25 °C / 41–77 °F.
• Do not use the material after the indicated date
of expiration.
• Keep out of children’s reach.
Delivery Form
Assortment
Standard pack
50 maxillary plates (pink)
1 light-protected container
Standard pack 50 maxillary plates (white)
1 light-protected container
Warning
Umpolymerized Light Tray material may have an
irritating effect. Avoid contact with skin mucous
membrane and eyes. Direct skin contact with
unpolymerized material may lead to a sensitizing
reaction. A mask should be worn and a suction
device used during grinding.
This material has been developed solely for use in dentistry. Processing should be carried
out strictly according to the Instructions for Use. Liability cannot be accepted for damages
resulting from failure to observe the Instructions for Use or the stipulated area of applicati-
on. The user is responsible for testing the material for its suitability and use for any purpose
not explicitly stated in the Instructions. Descriptions and data constitute no warranty of
attributes and are not binding. Moreover, liability cannot be accepted if Light Tray is mixed
with competitors’ products or processed in combination with them.
Light Tray-WE1.qxd 29.11.2001 14:51 Uhr Seite 5