Ivoclar Vivadent IPS Eris for E2 - Manual (Page 18)

18
IPS Eris for 2 Build-Up Liquid, 60 ml
This liquid is used to mix
the IPS Eris for E2 layering
materials. Absolutely no
other build-up liquid must
be used, since they contain
various organic additives,
which do not fire without
leaving residue at the
stipulated firing temperatures
and may thus result in
discolouration.
Components: water,
butandiol-chloride solution
IPS Empress 2 Special Investment Liquid
This liquid is exclusively used
to mix the IPS Empress 2
Special Investment material
and the IPS Empress
Investment material for the
layering technique. The
concentrated liquid must
only be mixed with distilled
water to achieve the desired
liquid concentration.
Components: 30 % wt.
colloidal silicic acid in water.
IPS Empress 2 Speed Investment Liquid
This liquid is exclusively used
to mix the IPS Empress 2
Speed Investment material.
The concentrated liquid must
only be mixed with distilled
water to achieve the desired
liquid concentration.
Components: 30 % wt.
colloidal silicic acid in water.
IPS Empress 2 Invex
The Invex liquid is used to
identify the reaction layer on
the pressed IPS Empress 2
frameworks.
Components: hydrofluoric
acid: < 1 % wt. and
sulphuric acid: < 2 % wt. in
water.
IPS Empress Universal Glaze and Stain Liquid, 15 ml
This liquid is used to adjust
the consistency of the
IPS Empress Universal
Shades, IPS Empress
Universal Stains, and
IPS Empress Universal Glaze.
Absolutely no other glazing
and staining liquid must be
used, since they contain
various organic additives that
do not fire without leaving
residue at the stipulated
firing temperatures and may
thus result in discolouration.
Components: butandiol
IPS Empress Die Material Isolating Liquid, 60 ml
This isolating liquid is
exclusively used to separate
the pressed IPS Empress
restorations during the
fabrication of the resin die.
It prevents the die material
from sticking to the ceramic
material.
Components: wax dissolved
in > 95 % wt. hexane
Liquids for the Empress 2 /
Eris for E2 layering technique
Warning
Butandiol is irritating. Avoid contact. Do not inhale
vapours.
Warning
Hexane is highly flammable and detrimental to
health. Avoid contact of the material with skin and
eyes. Do not inhale vapours. Keep away from
sources of ignition.
Disposal:
Carefully neutralize the diluted solution by adding
lime or baking soda (sodium carbonate, Na2CO3)
and letting it react for 5 minutes. After the reaction
time, pour the neutralized solution into the sink,
flushing it with running water.
IPS
IPS