Ivoclar Vivadent EP 600 Combi - Manual (Page 9)

2. Safety First
This chapter is especially important for individuals
who work with the EP600 Combi or who have to
carry out maintenance or repair work. This chapter
must be read and the corresponding instructions
followed! 2.1 Indications
The EP600 Combi has been designed for pressing
IPS e.max and IPS Empress ingots and for firing
dental ceramic materials and should be used for
these purposes only. Uses other than the ones
stipulated, e.g. cooking of food, firing of other
materials, etc., are contraindicated. The manufac-
turer does not assume any liability for damage
resulting from misuse. The user is solely responsi-
ble for any risk resulting from failure to observe
these instructions.
Further instructions to assure
proper use of the furnace:
– The instructions, regulations,
and notes in these Operating
Instructions must be observed.
– The instructions, regulations,
and notes in the vacuum
pump Operating Instructions
must be observed.
– The furnace must be operated
under the indicated environ-
mental and operating
conditions (see Chapter 9)
– The EP600 Combi must be
properly maintained.
2.1.1
Risks and dangers
Make sure that no liquids or
other foreign objects enter the
furnace or the air vents, since
this may result in an electrical
shock.
2.1.2
Burn hazard
The furnace head should not be
removed from the furnace and
placed on a working surface or
packaging material while it is
still hot, as there is a burn
hazard.
2.1.3
Risks and dangers
Never touch the electronic
components, since a static
discharge may damage them.
9