Delta PROFIBUS-DP Module for VFD Series Drives PD-01 - Manual (Page 28)

PD-01 PROFIBUS-DP Module
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 25
ExtUserPrmData = 13 "LossSPComTreat"
Unsigned16 0 0-2
Prm_Text_Ref = 3
EndExtUserPrmData
Ext_User_Prm_Data_Ref(0) = 1
Ext_User_Prm_Data_Ref(2) = 2
Ext_User_Prm_Data_Ref(4) = 3
Ext_User_Prm_Data_Ref(6) = 4
Ext_User_Prm_Data_Ref(8) = 5
Ext_User_Prm_Data_Ref(10) = 6
Ext_User_Prm_Data_Ref(12) = 7
Ext_User_Prm_Data_Ref(14) = 8
Ext_User_Prm_Data_Ref(16) = 9
Ext_User_Prm_Data_Ref(18) = 10
Ext_User_Prm_Data_Ref(20) = 11
Ext_User_Prm_Data_Ref(22) = 12
Ext_User_Prm_Data_Ref(24) = 13
File END: ==========================================================
NOTE:
The required GSD file is available and can be downloaded from the DELTA web site
http://www.delta.com.tw, or you can copy this text to a text editor such as NOTEPAD, and
save it as a GSD file named “DELT08DB.GSD”. Please make sure to specify the file name
extension as “.GSD”, PLEASE DO NOT SAVE IT extension “.GSD.TXT”.
User parameters in GSD file
The user parameters in GSD file are used for the configuration of the PROFIBUS network.
The description of the user parameters are shown in the following table:
Item Name Type Description Default
1 Data Input 1 UINT This is a MODBUS address. The 1st word in
PZD of cyclic output data will be sent to this
address.
0x2000
2 Data Input 2 UINT This is a MODBUS address. The 2nd word in
PZD of cyclic output data will be sent to this
address.
0x2001