Delta PROFIBUS-DP Module for VFD Series Drives PD-01 - Manual (Page 24)

PD-01 PROFIBUS-DP Module
DELTA ELECTRONICS, INC. ALL RIGHTS RESERVED 21
Chapter 5 User Parameters Setting in GSD file
GSD file
A GSD file is a text file used to identify PROFIBUS-DP device (Master or Slave), which
contains the necessary data for the configuration of DP slaves within a standard DP master.
Typical information in a GSD file are Vendor information, Baud rates supported, Timing
information, Options/features supported and Available I/O signals. The GSD file is the
fundamental building block for the master parameter record.
GSD-File for Delta VFD series Drives
File: DELT08DB.GSD
File start: ===========================================================
#Profibus_DP
; Unit-Definition-List:
GSD_Revision
= 1
Vendor_Name = "Delta Electronics"
Model_Name = "VFD DRIVES"
Revision
= "Rev. 1"
Ident_Number = 0x08DB
Protocol_Ident = 0
Station_Type = 0
FMS_supp = 0
Hardware_Release = "V1.0"
Software_Release
= "V1.0"
Redundancy = 0
Repeater_Ctrl_Sig
= 2
24V_Pins = 0
Implementation_Type = "SPC3"
Bitmap_Device = "VFDDRV"
Bitmap_Diag = "VFDDRV"
Bitmap_SF = "VFDDRV"
Slave_Family
= 1@TdF@Delta VFD Drives
Auto_Baud_supp = 1