IHSE USA 461 Series DVXi/ET KVM Extender - Manual (Page 44)

DVXI/ET-XX KVM-EXTENDER
44
Mounting Instruction Rackmount-Kit 455-8G
Using the Rackmount-Kit 455-8G, up to 4 devices of the device size 103x143x42mm
(Dualhead Devices) can be mounted into a 19“-Server Rack. The Rackmount Kit requires 1U
Rackspace. Blindplates (in the list of parts delivered) allow to cover unused device positions.
Rackmount-Kit 455-8G – List of parts delivered:
Mounting instruction:
•
Align the holes on the base plate with the vacant screw holes on the base of the device.
•
Fasten the base of the unit to the plate of the mounting kit
Only use the supplied, short screws, to prevent damages on
the PCB’s
•
Close the remaining gaps with blanking plates.
base plate
8 pieces spacer – M2,5x2
8 pieces M2,5x5 Philips type
countersunk screws 3 pieces blind plate