IHSE USA 461 Series DVXi/ET KVM Extender - Manual (Page 42)

DVXI/ET-XX KVM-EXTENDER
42
Appendix B: Rack Mount Options
DVXi KVM- Extender units can be mounted in a 19” rack using the mounting kit: DVXi-
Rackmount Kit. Two different versions are available – one each for Singlehead and for
Dualhead devices.
Mounting Instruction Rackmount-Kit 455-4G
Using the Rackmount-Kit 455-4G, up to 4 devices of the device size 103x143x29mm
(Singlehead Devices) can be mounted into a 19“-Server Rack. The Rackmount Kit requires
1U Rackspace. Blindplates (in the list of parts delivered) allow to cover unused device
positions.
Rackmount-Kit 455-4G – List of parts delivered:
Mounting instruction:
•
Align the holes on the base plate with the vacant screw holes on the base of the device.
•
Fasten the base of the unit to the plate of the mounting kit
Only use the supplied, short screws, to prevent damages on
the PCB’s
•
Close the remaining gaps with blanking plates.
base plate
8 pieces spacer – M2,5x2
8 pieces M2,5x5 Philips type
countersunk screws 3 pieces blind plate