IHSE USA 461 Series DVXi/ET KVM Extender - Manual (Page 31)

INSTALLATION
31
3.4 Diagnostic LEDs
Each DVXi/ET KVM-Extender is fitted with four indicator LEDs: Power, Video OK, Data
Error, Link Status: The Power LEDs are next to the Power socket.
The location of the LEDs is shown below:
Diagnostic - LEDs at DVXi/ET - Extender
LED Appearance Diagnostics
Power LED
(Red LED) Off
On Device not ready
Device ready
Video Okay
(Green LED) Off
On No or invalid video signal detected
Device ready
Link Status
(Green LED) blinking
On No INTERCONNECT connection
Device ready
Data Error
(Green LED) Off
blinking / On Device ready
Errors through data transmission over
INTERCONNCT Cable (Cable too long, too high
attenuation or too much EMI interferences )
Diagnostic LED
Power
Diagnostic LED
Video OK
Diagnostic LED
Data Error
Diagnostic LED
Link Status