DMP Electronics XR6 - Manual (Page 24)

20 System Setup
System Setup
We've provided this System Setup section to allow you to track the
current and future status of the programmable options on your
Security Command system. If you make changes to the system, you
should update the information contained on these pages.
Your system is monitored by a central station.
❏ Yes ❏ No
C/S Name: _____________________________________
Address: _____________________________________
City/State: _____________________________________
Emergency Phone: _____________________________________
Service Phone: _____________________________________
Service Manager: _____________________________________
Your system sends Opening and Closing reports.
❏ Yes ❏ No
Your system sends Zone Bypass reports.
❏ Yes ❏ No
Your system sends Ambush reports.
❏ Yes ❏ No
Security Command keypads
Address Locations
1 _____________________________________________
2 _____________________________________________
3 _____________________________________________
4 _____________________________________________
Outputs
Your system has 4 outputs that are used to control various functions
within the building or around its perimeter. Below is a list of these
outputs and the devices they control.
Output # What it controls
1 _____________________________________________
2 _____________________________________________
3 _____________________________________________
4 _____________________________________________
Enter the Output number above when using the Outputs On Off User
Menu option to manually toggle the outputs.