Hypertherm MAX200 Service Manual - Manual (Page 97)

4-2 MAX200 Service Manual
PARTS LIST
Introduction
In this section is a parts list breakdown with accompanying drawings for the MAX200 machine and hand-torch
systems.
Internal power supply cabling and hosing are not shown in the drawings. Part numbers for this hosing with
connection point referencing are on page 4-58.
The format to list and call out Hypertherm parts is as follows:
Part
Item Number Description Designator Qty.
029319 Contr Pnl SA, MAX200 Thumb/Pot 1
7 006027 Valve, needle, 1/4 NPTF V5 1
029360 Thumbwheel/Pot Panel SA MAX200 1
25 075165 Hexnut, 6-32, WXF .250, .093, S/Z 4
029383 Thumbwheel switch SA 1
27 008186 Socket, 20-24 AWG Type III+ 7
38 005121 Pushbutton, 2 NO Green Illumin PB1 1
Item: Refers to item call out on opposing or current page.
Number (Ex. 7) refers to numbered call out on opposing or current page.
Part
Number:
Refers to Hypertherm part numbers.
Bold part numbers (Ex. 029319 ) signify parent or subassemblies that contain additional items.
Normal-style part numbers (Ex. 006027) signify items under parent or subassembly.
Description: Describes the item.
Bold descriptions not indented (Ex. Contr Pnl SA, MAX200 Thumb/Pot ) signify parent
assemblies that contain additional items.
Normal-style part numbers that are indented (Ex. Valve, needle, 1/4 NPTF) signify items under
parent or subassembly. In this example, parent is
Contr Pnl SA, MAX200 Thumb/Pot .
Bold descriptions that are indented (Ex. Thumbwheel/Pot Panel SA MAX200 ) represent
subassemblies that are under a parent assembly.
In this example, parent assembly is Contr Pnl SA, MAX200 Thumb/Pot and subassembly
Thumbwheel/Pot Panel SA MAX200 contains additional items.
Normal-style part numbers that are not indented (Ex. Pushbutton, 2 NO Green Illumin) represent
items not under parent assembly.