Hypertherm MAX200 Service Manual - Manual (Page 163)

4-68 MAX200 Service Manual
PARTS LIST
Figure 4-32 HS Interface Cable – Power Supply to IHS
Indicates Pairs
Indicates Pairs w/Drain
Note: On IHS End, cut Red/Black Shield &
White/Black Shield Wires
008176 PIN (9)
047002 Cable, 23-3 PR
Power Supply End
1X3
IHS End
008185 Plug, Shell 13-9
008187 Strain Relief
008202 Plug, Shell 17-14
008192 Strain Relief
008186 Socket (7)
008190 Key
Insert key in face of
plug, tapered end first,
until it locks in detent.
Part No. Length
0 23111 25 ft (7.6m)
023112 50 ft (15m)
023155 75 ft (23m)
023113 100 ft (30.5m)
023114 150 ft (46m)
023284 200 ft (61m)
Legend – Power Supply End
PIN COLOR FUNCTION
1 Red IHS Complete Sig.
2 Grn Upper Limit Sw Sig
4 Blk IHS Complete Com
5 Blk Upper Limit Sw Com
7 Drain Shield-Wht/Blk
8 Drain Shield-Red/Blk
9 Drain Shield-Grn./Blk
11 Blk AC Power
14 Wht AC Power
Legend – IHS End
PIN COLOR FUNCTION
1 Red IHS Complete Sig.
2 Grn Upper Limit Sw Sig
3 Blk Upper Limit Sw Com
4 Blk IHS Complete Com
5 Drain Shield-Grn/Blk
7 Key
8 Wht AC Power
9 Blk AC Power