Hypertherm MAX200 Service Manual - Manual (Page 41)

2-6 MAX200 Service Manual
1-99
SPECIFICATIONS
Digital Remote (DR) V/C Control – Optional
Controls ................................................................Voltage adjust pot:
Adjusts arc cutting voltage and displays value on LEDs.
Current adjust pot:
Adjusts arc cutting current and displays value on LEDs.
Dimensions:
Width ....................................................................11-1/2" (29 cm)
Height ...................................................................3" (7.6 cm)
Depth....................................................................13-3/8" (34 cm)
Weight ..................................................................5 pounds-5 oz. (2.4 kg)
Programmable Remote (PR) V/C Control – Optional
Controls ................................................................None. Controlled through guidance machinery computer.
Dimensions:
Width ....................................................................11-1/2" (29 cm)
Height ...................................................................3" (7.6 cm)
Depth....................................................................12-1/2" (31.8 cm)
Weight ..................................................................5 pounds-5 oz. (2.4 kg)
Initial Height Sensing – Optional
Input Power ..........................................................120 VAC from power supply
Air Pressure .........................................................20 psi (1.4 bar) regulated shop air input to solenoid.
Dimensions:
Width ....................................................................9" (23 cm)
Height ...................................................................4-1/2" (11 cm)
Depth....................................................................11-1/2" (29 cm)
Weight ..................................................................13 pounds (6 kg)
Water Muffler – Optional
Refer to Water Muffler Instruction Manual (P/N 802050). Must use optional 1.75" diameter torch to install
Water Muffler.