Hypertherm MAX200 Service Manual - Manual (Page 40)

MAX200 Service Manual 2-5
1-99
SPECIFICATIONS
PAC200T (90° & 65°) Cutting/PAC200E (65°) Gouging/MAX200 Rev 1 (90°) Hand Torches
Maximum cutting thickness ..................................2 inches (50 mm)
Maximum current at 100% duty cycle ..................200 amps
Plasma Gas Flow .................................................66 scfh (Air), 60 scfh (N
2
), 70 scfh (H35), 72 scfh (O
2
)
Shield Gas Flow ...................................................220 scfh (CO
2
), 280 scfh (Air), 290 scfh (N
2
)
Water Coolant Flow Rate .....................................0.8 gpm (3.0 l/min)
Weight ..................................................................3 lbs (1.4 kg - MAX200 Rev 1 90°)
2-1/2 lbs. (1.1 kg – PAC200T/E)
MAX200 Machine Torch
Maximum cutting thickness ..................................2 inches (50 mm)
Maximum current at 100% duty cycle ..................200 amps
Plasma Gas Flow .................................................66 scfh (Air), 60 scfh (N
2
), 70 scfh (H35), 72 scfh (O
2
)
Shield Gas Flow ...................................................220 scfh (CO
2
), 280 scfh (Air), 290 scfh (N
2
)
Water Coolant Flow Rate .....................................0.8 gpm (3.0 l/min)
Weight ..................................................................2-1/2 lbs. (1.1 kg)
Switch Remote (SR) V/C Control
Controls ................................................................Start button:
Activates IHS (if on) and initializes pilot arc.
Stop button:
Deactivates main contactor in power supply.
IHS On/Off switch:
Turns IHS system on or off.
Auto Height On/Off switch:
Activates THC in power supply.
Voltage adjust pot:
Adjusts arc cutting voltage and displays value on LEDs.
Current adjust pot:
Adjusts arc cutting current and
displays value on LEDs.
Control Range ......................................................Current: 40 to 200 Amps
Voltage: 100 to 200 Volts
Control Resolution................................................Current: 20 Amps
Voltage: 5 Volts
Dimensions:
Width ....................................................................11-1/2" ( 29 cm)
Height ...................................................................5" (13 cm)
Depth....................................................................13-1/4" (34 cm)
Weight ..................................................................6 pounds (2.7 kg)