Hoefer SE615 - Manual (Page 11)

Note: For optimum visibility,
place a polycarbonate sheet
against the faceplate.
4
Place a polycarbonate sheet or wax paper on top of
the club sandwich.
Repeat step 3, alternating wax paper and club
sandwiches.
5
After the last club sandwich, add acrylic spacer blocks
and extra polycarbonate sheets until the entire stack is
approximately 0.5 mm above the rim of the box.
•
p8
Fig 3. Constructing a “club
sandwich” for casting with
divider plates.
glass plate
spacer
notched divider plate
spacer
glass plate
wax paper or
polycarbonate sheet
one club
sandwich
additional club
sandwiches