Herrmersion re – Herrmidifier Herrmersion RE User Manual
Page 4
Herrmersion RE
I n s t a l l a t i o n , O p e r a t i o n , & M a i n t e n a n c e M a n u a l
4
www.herrmidifier-hvac.com
MODEL NUMBER NOMENCLATURE
RE
*
*
*
*
*
Model Prefix
1
2
3
4
5
RE
S
P
480
3
45
Model Prefix
1
2
3
4
5
Position
Meaning
Option
Description
Prefix
Product Family
RE
RE Electric-to-steam
1
Size (number
of tanks)
S
Single Tank
D
Dual Tank
2
Control Type
P
Proportional Control
I
Proportional + Integral
H
Custom (on/off humidistat)
3
Voltage
208
240
380
415
480
600
4
Phase
1
Single Phase
3
Three Phase
5
Capacity (lb/hr)
30
(2) 5 KW heaters
45
(3) 5 KW heaters
90
(6) 5 KW heaters
OVERALL UNIT DIMENSIONS
27.75
25.20
21.29
RECEIVING INSTRUCTIONS
Inspect shipment immediately upon arrival to determine if
there is any noticeable freight damage to the packaging.
After the unit has been unpacked, check for any damage
to the unit. Take notice that the drain cup mounted to the
underside of the unit is not cracked or damaged.
If any damage is found, the consignee should sign the bill of
lading indicating such damage and immediately file a claim
for that damage with the transportation company.
PRE-INSTALLATION INSTRUCTIONS
After the unit is received and unpacked, check the external
data plate and all labels on the unit for electrical and
operational specifications to confirm that these agree with
those at point of installation.
Note: It is the owner’s responsibility to provide any
scaffolding or other apparatus required to perform emergency
service or annual/periodic maintenance to this equipment.
GENERAL SAFETY REQUIREMENTS
WARNING
Open all disconnect switches before installing the unit.
Failure to do so could result in personal injury or death from
electrical shock.
WARNING
Failure to comply with the general requirements may result in
extensive property damage, severe personal injury or death.