Guralp Systems CMG-CD24R8 - Manual (Page 3)

User's Guide
1 Introduction
The CMG-CD24R8 is a rack-mounted, eight-channel, general purpose
digitiser, featuring:
•
24-bit sigma-delta analogue to digital converters;
•
Low power: < 6W from 12V–15V DC;
•
±10V balanced differential input lines, connected to front or rear;
•
GCF format output over serial cables, USB or Ethernet; and
•
Multiple user-configurable output rates.
Once it is provided with 12 – 15 V power, the CD24 will begin
operating automatically, digitizing its input signals and either
outputting them to your own recording system, or saving them into
internal Flash memory. Accurate timing information can be taken
from a GPS receiver and multiple CMG-CD24R8s can be synchronised
to a single receiver.
The CMG-CD24R8 can be configured using either a CMG-EAM or
Scream, GSL's free monitoring and configuration software. If neither
are available, the on-board command line interpreter allows complete
control and configuration of the digitiser via a serial or telnet link.
August 2012 3