Guralp Systems CMG-CD24R8 User Manual
Page 15
User's Guide
Click on Channel 2 – Serial Settings.
Set the Baud Rate to 115,200. This is the default baud rate for
the CD24-R8's digital output. If you change the baud rate in
Scream!, using an EAM or from the command line, you must
come back to this page and change the Baud Rate setting. It is
recommended that this setting is not changed.
The remaining settings can be left at their default values. Click
OK to save your changes.
For full information on the WiPort-NR's configuration options,
please refer to the WiPort-NR documentation, which is available
on the Lantronix Web site at
3. When you have finished setting up the WiPort-NR, apply the
new settings by clicking Apply Settings. The WiPort-NR will re-
boot with the new settings in effect.
If the WiPort-NR is using an automatically chosen random IP
(beginning with 169.254), the IP address will change when you
do this. You will need to go back to DeviceInstaller to find out
the new IP address.
August 2012
15