Guralp Systems CMG-CD24R8 - Manual (Page 17)

User's Guide
5.2 Rear panel
5.2.1 Power
The power connector is a Switchcraft 712A 2.5mm
barrel connector wired with the tip +ve and the
shield -ve. A 12 - 15V DC regulated supply must be
used. There is some variation amongst connectors
labelled “ 2.5mm barrel” so it is recommended that
mating connectors are purchased from GSL.
5.2.2 GPS
This is a standard 6-pin “mil-spec” socket,
conforming to MIL-DTL-26482 (formerly
MIL-C-26482). A typical part-number is
02E-10-06S although the initial “02E” varies
with manufacturer.
Suitable mating connectors have part-
numbers like ***-10-06P and are available
from Amphenol, ITT Cannon and other
manufacturers.
Pin Function
A
Isolated ground
B RS232 receive from GPS
C RS232 transmit to GPS
D PPS
E not connected
F Power +5 V
Wiring details for the compatible plug,
***-10-06P, as seen from the cable end (i.e.
when assembling).
August 2012 17