Guralp Systems CMG-5T - Manual (Page 5)

Operator's Guide
2 Installation
2.1 Unpacking and packing
The CMG-5T accelerometer is delivered in a single cardboard box with
foam rubber lining. The packaging is specifically designed for the 5T
and should be reused whenever you need to transport the sensor.
Please note any damage to the packaging when you receive the
equipment, and unpack on a clean surface. The package should
contain:
•
the accelerometer;
•
a signal connection cable (if ordered); and
•
a connector, of type 06F-14-19S.
Place the accelerometer on a clean surface, and identify:
•
The signal cable connector on the top of the unit;
•
The N/S orientation line, engraved on the lid;
•
The N/S orientation pointers (studs);
•
The bubble level;
•
The screw-on cover for the output offset adjuster (see below);
December 2009 5