Denon DN-H800 - Manual (Page 22)

22
ENGLISH
USING THE TIMER
• Timer recording/playback can be made using any audio timer
available on the market.
2 Playing a compact disc with the timer
1. Make sure the connections are correct, especially the
power supply connections.
2. Turn “ON” the POWER switch of each appliance.
3. Load the disc to be played back.
4. Set the monitor switch of the Amplifier to the CD position.
5. Press the PLAY ( 1 ) button and playback the CD; adjust the
playback level.
Press the STOP ( 2 ) button.
6. Set the TIMER switch to the “CD” side.
TUNER
CD OFF
TIMER
TUNER
CD OFF
TIMER
7. Set the audio timer to the desired time. The audio timer will
turn the power supply on the desired time.
5. Set the audio timer to the desired time. The audio timer will
turn the power supply on at the desired time.
* With the above procedures, timer playback can be
accomplished. When the preset time comes, the power is
supplied and playback will start.
Timer playback is performed as described below,
depending on the CD play mode set before timer playback
starts.
Direct mode: Playback starts from the first track on the
disc that was played last.
Program mode: Playback starts from the first track in the
program.
Random mode: Playback starts in the random mode.
2 Play the tuner with the timer
1. Make sure the connections are correct, especially the
power supply connections.
2. Turn “ON” the POWER switch of each appliance.
3. Use the PRESET buttons to set the preset channel number.
4. Set the TIMER switch to the “TUNER” side.
8 9
REMOTE CONTROL UNIT RC-176
This is a separately sold remote control unit.
(The separately sold remote control unit is not included with the DN-H800.)
Automatic search reverse button ( 8 )
Automatic search forward button ( 9 )
REPEAT button
RANDOM button
DISC SKIP button
PAUSE button ( 3 )
STOP button ( 2 )
PLAY button ( 1 )
CD operation buttons
PRESET buttons ( • / ª )
Tuner operation buttons