Denon DN-H800 - Manual (Page 18)

18
ENGLISH
(4) To Cancel Random Play
• Pressing the RANDOM button once more cancels the Random
function. Play will then proceed from the track currently being
played to the end of the last track on the disc, then stop.
Pressing the OPEN/CLOSE ( 5 ) button also cancels the
Random function.
Cautions
• Pressing the RANDOM button during normal play starts full
random play.
• Pressing the RANDOM button during Program play starts
random play of the tracks in the program, including the tracks
which have already been played.
• During random play, the player may display the number of disc
which is not loaded in the tray. In such a case, the player will
read the disc information, then reset automatically to correct.
This is not a malfunction.
i
To Stop Play Temporarily ………………………… Pause
o
Audible quick search …………………… Manual Search
LEVEL TUNER OUT ADJ
MIN MAX MIN MAX
TUNER CD OFF
OPEN/CLOSE 5 DISC AUTOMATIC DISC LOADING SYSTEM
DN-H800 TUNER / 5CD CHANGER
PHONES
STOP PAUSE
PLAY
1 2 3 4 DISPLAY UP DOWN
ON/OFF BAND AUTO/
MANU SEARCH /CHA SHIFT /PTY MEMORY
TUNER TUNING 5
PLAY MODE
TIMER
OUTPUT SELECT
1 2 3 4 5
1 2 3 4 6 7 8 9 5 0 /CLEAR PROGRAM /DIRECT
RANDOM REPEAT
TIME
CALL
PITCH
+10 DISC SELECT SKIP
PRESET
SELECTED SEPARATE SINGLE CONTINUE REMOTE
SENSOR DISC P. SET MEMO
TRACK TP PTY RDS PS
kHz
MHz
POWER
ON OFF
PHONES DISP SELECT
DISC 1 2 3 4 5
2
1,2
• Pressing the PAUSE button during play stops play at that point.
Pressing the PAUSE button once more starts play again from
the same point.
1. Press the PAUSE ( 3 ) button.
2. Press the PLAY ( 1 ) button or the PAUSE ( 3 ) button.
* Press the PLAY ( 1 ) button or the PAUSE ( 3 ) button to start
play.
• Using this function, you can cue to a desired point within a
track, either in the forward or reverse direction.
• Release the automatic/manual search button ( 8 / 6 or
7 / 9 ) when the desired point has been reached. Normal
playback then continues.
LEVEL TUNER OUT ADJ
MIN MAX MIN MAX
TUNER CD OFF
OPEN/CLOSE 5 DISC AUTOMATIC DISC LOADING SYSTEM
DN-H800 TUNER / 5CD CHANGER
PHONES
STOP PAUSE
PLAY
1 2 3 4 DISPLAY UP DOWN
ON/OFF BAND AUTO/
MANU SEARCH /CHA SHIFT /PTY MEMORY
TUNER TUNING 5
PLAY MODE
TIMER
OUTPUT SELECT
1 2 3 4 5
1 2 3 4 6 7 8 9 5 0 /CLEAR PROGRAM /DIRECT
RANDOM REPEAT
TIME
CALL
PITCH
+10 DISC SELECT SKIP
PRESET
SELECTED SEPARATE SINGLE CONTINUE REMOTE
SENSOR DISC P. SET MEMO
TRACK TP PTY RDS PS
kHz
MHz
POWER
ON OFF
PHONES DISP SELECT
DISC 1 2 3 4 5
7 / 9
(1) Manual Search Forward
1. Keep on pressing the automatic/manual search forward button
( 7 / 9 ) for more than 0.5 seconds during playback.
Playback of the track is speed up.
• As a reference, the current track number and elapsed playback
time within the track are displayed.
• Manual search forward is approximately three times faster
when engaged during the pause state compared to playback.
In this case, no sound is heard however.
• If the automatic/manual search forward button ( 7 / 9 ) is
held in until the end of the disc is reached, the next disc is
selected.
LEVEL TUNER OUT ADJ
MIN MAX MIN MAX
TUNER CD OFF
OPEN/CLOSE 5 DISC AUTOMATIC DISC LOADING SYSTEM
DN-H800 TUNER / 5CD CHANGER
PHONES
STOP PAUSE
PLAY
1 2 3 4 DISPLAY UP DOWN
ON/OFF BAND AUTO/
MANU SEARCH /CHA SHIFT /PTY MEMORY
TUNER TUNING 5
PLAY MODE
TIMER
OUTPUT SELECT
1 2 3 4 5
1 2 3 4 6 7 8 9 5 0 /CLEAR PROGRAM /DIRECT
RANDOM REPEAT
TIME
CALL
PITCH
+10 DISC SELECT SKIP
PRESET
SELECTED SEPARATE SINGLE CONTINUE REMOTE
SENSOR DISC P. SET MEMO
TRACK TP PTY RDS PS
kHz
MHz
POWER
ON OFF
PHONES DISP SELECT
DISC 1 2 3 4 5
8 / 6
(2) Manual Search in Reverse
1. Keep on pressing the automatic/manual search reverse button
( 8 / 6 ) for more than 0.5 seconds during playback.
Reverse playback of the track is sped up.
• As a reference, the current track number and elapsed playback
time within the track are displayed.
• Manual search in reverse is approximately three times faster
when engaged during the pause state compared to playback.
In this case, no sound is heard however.
• If the automatic/manual search reverse button ( 8 / 6 ) is
pressed continuously, it will reach the beginning of the first
track on the disc. Release the automatic/manual search
reverse button ( 8 / 6 ) to resume normal playback.
!0
To Cue and Stop Play ………………………………
LEVEL TUNER OUT ADJ
MIN MAX MIN MAX
TUNER CD OFF
OPEN/CLOSE 5 DISC AUTOMATIC DISC LOADING SYSTEM
DN-H800 TUNER / 5CD CHANGER
PHONES
STOP PAUSE
PLAY
1 2 3 4 DISPLAY UP DOWN
ON/OFF BAND AUTO/
MANU SEARCH /CHA SHIFT /PTY MEMORY
TUNER TUNING 5
PLAY MODE
TIMER
OUTPUT SELECT
1 2 3 4 5
1 2 3 4 6 7 8 9 5 0 /CLEAR PROGRAM /DIRECT
RANDOM REPEAT
TIME
CALL
PITCH
+10 DISC SELECT SKIP
PRESET
SELECTED SEPARATE SINGLE CONTINUE REMOTE
SENSOR DISC P. SET MEMO
TRACK TP PTY RDS PS
kHz
MHz
POWER
ON OFF
PHONES DISP SELECT
DISC 1 2 3 4 5
2
1
(1) Cuing by Direct Selection
• Cuing by direct selection, then entering the Pause state, is
convenient for practicing vocals with background music.
1. Press the PAUSE ( 3 ) button.
2. Press the number buttons to set the number of the desired
track.
• To start play, press the PLAY ( 1 ) button or the PAUSE ( 3 )
button.
Pause
(2) Cuing by Program Selection
• After setting the desired track selections in a program, press
the PAUSE ( 3 ) button. The player will advance to the
beginning of the 1st track in program memory and wait in the
Pause state.
4th Track 5th Track 6th Track
(Pause)