Gullco PK-500-LG-x - Manual (Page 30)

26
Table of Oscillator Head Values
Increments Increments
Oscillator
Head Model
Units Of
Measure
Minimum
Speed
Maximum
Speed
of
Speed
Adjustment
Range
Without
Dwells
Range
With
Dwells
of
Width
Adjustment
Units of
Travel per
Motor Step
Inches 0.5 "/min 140 "/min 0.5 "/min 0.09" - 0.18" 0.19" - 2.50" 0.01" 0.00050000
Cm 1 cm/min 355 cm/min 1 cm/min 0.23 - 0.46 cm 0.47 - 6.35 cm 0.01 cm 0.00127000
PK-500-012
(Standard
Linear)
Width of Oscillation
Note:
Linear stroke is 4” [10.2cm] on PK-500-012 with 2.5” [6.35cm] maximum oscillation width.
Oscillator Control Motor (PK-200-300) Board Dip Switch Settings
The Oscillator Control Motor Board is located inside the control box that is mounted on
the PIPE KAT
®
carriage.
Dip Switch S42:
Switch # 1 Switch # 2 Setting
Off Off Future use
On Off When used on a Gullco Pipe KAT
®
Off On Future use
On On Future use