Gullco PK-500-LG-x - Manual (Page 18)

14
WIRE FEED PINCH ROLLER PRESSURE ADJUSTMENT: Allows the operator to adjust and
maintain roller pressure on the wire feeder.
WIRE SPOOL TENSION ADJUSTMENT: Allows the operator to adjust and maintain spool
tension
EMERGENCY STOP: The emergancy stop button serves as a safety feature that will terminate
all operations and shut down the PIPE KAT
®
unit when pressed. The emergency stop will
remain activated unit it is reset by turning the button in a clock-wise motion. There are two (2)
other such emergency stop button; one (1) on the Remote Pendant and one (1) on the Main
Control Box. These three (3) Emergency Stop Button are wired in series, so any one (1) will
shut down the PIPE KAT
®
system when activated, and all three have to be released in order for
the system to power-up.
CARRIAGE DRIVE MOTOR: This DC motor provides the motive propilsion that drives the PIPE
KAT
®
carriage around the Pipe Band/track.
CARRIAGE CONTROL CONNECTION: This receptical corresponds to the large electrical
connectior on the umbilical.
CARRIAGE ELECTRODE CABLE CONNECTION: Connect to the corresponding twist lock
electrode cable connection on the umbilical.
DRIVE
ENGAGEMENT
LEVER
TORCH
LEAD/LAG
ADJUSTMENT
TORCH PIVOT
WIRE FEEDER
LINEAR
OSCILLATOR
HEAD
UMBILICAL
CLAMP
TORCH SLIDE
TORCH
MOUNTING
BRACKET