Gullco SAM CM-02-250 User Manual
Page 8
6
OPERATION
Local Control Devices
The power On/Off switch is used to disconnect the power to the rest of the control circuitry.
I = on, O = off.
WARNING!
The motor control must not be continually started and stopped by the removal and
reapplying of power to the control. Turning the power off to the control will not
provide instant braking and continued use will damage the control. Allow ten (10)
seconds after the removal of power before reapplying the power to the motor control.
The fuse holder allows accessibility to the main fuse by pushing the cap in towards the main body
and twisting in a counter-clockwise direction.
On/Off Switch
Fuse Holder